These stands open to take a hammered dulcimer so it will be playable in one position only, they are not adjustable. The stand is available for either a standing or sitting position. Designed specifically for my Table Top and Harmony models but I think this will be suitable for many 9+9 to 12+12 instruments. Unless they are very deep sided instruments. The standing stand has a height of 830mm at the front and 880mm at the back and folds into a nice neat 1020mm long x 90 x 45 shape. You will have to add the height of your dulcimer from the base-board to the strings to get the total height. The stands are made from yellow pine, it has a more obvious grain than DIY type pine and far fewer knots. Sizes for the sitting stand to follow.I can make them to a specific height but they will be £20 extra because of the extra drawing work. You will need to email me on that as well.