Harmony Pro 12 + 12 Hammered Dulcimer, Scissors folding dulcimer stand and padded polyester carry/gig bag.
Pro version of the Harmony Dulcimer. A quality full size instrument. Constructed from top quality materiels. Beech and Ash frame with Maple bridges. Nicely shaped handle cut out into the back, for easy manouverability. German made pins and music wire.
Strings are tied individually so you will still have a note if a string breaks.
Rippled Maple edge binding to soundboard.
Felt on the edges
Colour - Natural
Finish - hardwearing Melamine Laquer
Supplied with an instrument guide book, a pair of hardwood playing hammers, and a tuning key.
Made in England
This bag fits the three harmony models in quite a nice snug fashion. The pocket is big enough to fit an A4 boolket and acessories. The stap is adjustable and the handles each side can be connected together.
It does a nice job of carrying the instrument around in a lightweight fashion. It doesn't do the job of a flight case so you still do have to take care of the instrument/bag combo!
For serious frequent moving you really need a flight case.
These stands open to take a hammered dulcimer so it will be playable in one position only, they are not adjustable. The stand is available for either a standing or sitting position. Designed specifically for my Table Top and Harmony models but I think this will be suitable for many 9+9 to 12+12 instruments. Unless they are very deep sided instruments. The standing stand has a height of 830mm at the front and 880mm at the back and folds into a nice neat 1020mm long x 90 x 45 shape. You will have to add the height of your dulcimer from the base-board to the strings to get the total height. The stands are made from yellow pine, it has a more obvious grain than DIY type pine and far fewer knots. Sizes for the sitting stand to follow.I can make them to a specific height but they will be £20 extra because of the extra drawing work. You will need to email me on that as well.